Reboot FITBIT Aria 2 Wi-Fi Smart Scale

Reboot FITBIT Aria 2 Wi-Fi Smart Scale

How to reboot your FITBIT Aria Wi-Fi Smart Scale

  1. Get closer to your router,
  2. Look for the power button, it may be on the front or the back of the device. If your router doesn't have one, you can reboot it by plugging it off and on again.

  3. Press it and hold it for a while until the router is fully disabled.
  4. After a short while, try doing the same thing, press the power button and hold it until the router is turned on.
  5. That's it! You've rebooted your FITBIT Aria Wi-Fi Smart Scale!

Repeat WiFi Network with FITBIT Aria Wi-Fi Smart Scale

How to Repeat WiFi Network with FITBIT Aria Wi-Fi Smart Scale

  • First off, reset your router (the one you want to turn into a repeater).
  • Now, open your router's login page and enter.
  • You'll have to set a static IP Address for your router. Usually, you would set your repeater's address one higher than your main router address, for example, if your main router has the address 192.168.0.1 then you would set address 192.168.0.2 for your repeater.
  • Make sure your main router is connected to your repeater router by cable to the WAN port.
  • Now, locate AP Mode or Repeater Mode on your repeater router, enable it.
  • Great job! You've turned FITBIT Aria Wi-Fi Smart Scale into an repeater!

Reset FITBIT Aria Wi-Fi Smart Scale Using Mobile App

Learn how to Reset your router using Mobile App. This is the best method to reset the FITBIT Aria Wi-Fi Smart Scale settings to factory default with Mobile App.

Reset FITBIT Aria Wi-Fi Smart Scale Using Mobile App:

  1. At the start, open your FITBIT Aria Wi-Fi Smart Scale Mobile App on your phone.
  2. Now you need to login to your router by the app or connect the phone to the router Wi-Fi network.
  3. Then go to Advanced settings.
  4. Find the Reset or Factory defaults button and press on it.
  5. Confirm your choice and wait for a moment.
  6. Well done! You successfully reset your FITBIT Aria Wi-Fi Smart Scale with Mobile App.

Restore FITBIT Aria Wi-Fi Smart Scale Settings from Backup

Learn how to restore a backup to the FITBIT Aria Wi-Fi Smart Scale router. Find out what is the best way to restore a backup to FITBIT Aria Wi-Fi Smart Scale.

How to restore FITBIT Aria Wi-Fi Smart Scale settings:

  1. Firstly, open FITBIT Aria Wi-Fi Smart Scale Admin Page, if you don't know how you can check how to open FITBIT Aria Wi-Fi Smart Scale Admin Page here.
  2. Then go to the Maintenance and find a section named Backup/Restore.
  3. Now press Choose file button and point to where you saved the backup file.
  4. After that click on Upload and wait for a moment, log into the router again if necessary.
  5. Great! You sucessfully restore backup on your FITBIT Aria Wi-Fi Smart Scale.

https://www.hardreset.info/

Comments

Post a Comment