Port Forward for PlayStation 4 on FITBIT Aria Wi-Fi Smart Scale

How to configure port forwarding for PlayStation 4 on FITBIT Aria Wi-Fi Smart Scale. Port Forward all the necessarry ports on FITBIT Aria Wi-Fi Smart Scale for PlayStation 4.

How to setup PlayStation 4 port forwarding on FITBIT Aria Wi-Fi Smart Scale?

1. Open Settings on your PlayStation 4.
2. Then open Network.
3. Select View Connection.
4. Write down DNS, Default Gateway, Subnet Mask, and MAC Address.
5. Open FITBIT Aria Wi-Fi Smart Scale control panel, if you don't know how, check how to setup FITBIT Aria Wi-Fi Smart Scale.
6. Go to DHCP and Home.

   

7. Enter Host name, IP address! IT MUST BE DIFFERENT THAN THE DHCP IP ADDRESSES RANGE! and MAC address that you found earlier in the PS4 settings.
8. Click Apply to save all the settings.
9. Go Back to PS4, and choose Settings, Network, and Setup Internet Connection.
10. Then go to the Custom, and Manual Settings. 
11. Enter IP address previously set as static IP for PS4, and default gateway, subnet mask, and DNS servers as it was before. 
12. Go to FITBIT Aria Wi-Fi Smart Scale settings and choose Advanced and Virtual Servers.

    

13. Set all the settings as shown in the picture.
14. If you don't have Both options, do it manually for TCP ports and UDP ports respectively.
15. You need to port forward the following ports: 80, 443, 465,983, 1935, 3478-3480, 3658, 5223, 10070-10080.
16. Fantastic! With all the ports properly forwarded you have a NAT Type 2 connection between PlayStation 4 and FITBIT Aria Wi-Fi Smart Scale.

https://www.hardreset.info/